MSD crank trigger

Technical Assistance for Super Pro and other non-junior related Drag Racing Classes

Moderators: WILD BILL, livewire, 2kidsracin, Pool Man, chili man

MSD crank trigger

Postby Mike Ganoe » Mon Jan 23, 2017 10:20 am


Working on my daughter's footbrake car. Going to change over to MSD grid system and want to add crank trigger set up also. Measured balancer on motor (350 Chevy) at 6.5 inches. Only
crank trigger wheels I see are 6.25 inches or 7 inches. Which one do I need?

Mike Ganoe
Posts: 176
Joined: Wed Jan 14, 2009 3:09 pm
Location: Radford, VA

Re: MSD crank trigger

Postby Pool Man » Tue Jan 24, 2017 11:00 pm

I would think you would need the larger diameter. The reason I say that is due to setting the pickup. It needs (IIRC) to be approx. .080 from the edge of the wheel. If you were to use the smaller wheel then you would not be able to set the proper distance due to it hitting the balancer before you get to the .080. Most I have seen however are just small amount larger if not the same size as the balancer. I see nothing wrong with using one larger.
I deserve respect for the things that i DO NOT do.
User avatar
Pool Man
Posts: 13691
Joined: Thu Dec 25, 2003 5:11 pm
Location: Chesapeake, Va.

Return to Tech Talk

Who is online

Users browsing this forum: No registered users and 1 guest