- This topic has 1 reply, 2 voices, and was last updated 2 years, 5 months ago by .
- You must be logged in to reply to this topic.
Here is the youTube link for the Tech Talk I did on 11/2/21 where we primarily went over the clutch helix and primary plus some questions and answers at the end.
www.NicWoodsRacing.com
Hi Nick, I’m Jeremy Boskovich from Sydney Australia, we have currently stepped back my sons 3 1/2 McGee to a 3 1/4 , since doing this we have run into a really bad stumbling which eventually clears up before 60ft. The thing is it only does this with the shockwave primary and secondary clutch. When I put our polar quick shift primary and secondary it doesn’t do it. But it revs to almost 10000 on the shift, we want to run the shock wave set up, I’ve changed the fly weights to c4 36 from c4 38, and has made no difference. It’s like a manual car taking off in second or third gear. I’m quite baffled on what’s going on. I have tightened up the secondary one hole but are yet to try it due to weather. I’d really appreciate any advice regards Jeremy
Started by: Jeremy Blanchard in: General
Started by: Tyler Snowden in: Chassis
Started by: Wade Metzinger in: Engine
Started by: Scott Tipps in: Carb
Started by: Redneckracer in: Clutch
Started by: Brent Catalanotto in: Engine
Started by: Rob Butler in: General
Started by: Cory Selleck in: General
Started by: Keith Zimmer in: Clutch
Started by: Robert Hamilton in: Engine
Started by: Robert Hamilton in: General
Started by: Todd Shaul in: General
Started by: Mike Holland in: For Sale